teach step by step how to configure the IP address of a computer step by step so someone who starts in the computing world can perform this procedure successfully. Log
- to Start>> Control Panel
- Login to Network
- Select Network Interface to configure right click on that interface and select Properties.
- General and select "Internet Protocol (TCP / IP)"
- clcik the "Properties" button in Figure 4.
- Select option "Use the Following IP address" and enter the information that is in the red boxes in Figure 5 and sets the following fields:
- IP Address: ID number that identifies a computer within a computer network using the TCP / IP. There should be more than one machine with the same IP address on the network, the IP address can be changed as often as required.
- subnet mask: Data that provides a network of computers the size of a network, typically this data tells us how many network computers can have a maximum.
- Address Gateway (gateway) IP Address of a computer configured to provide equipment for local area network (LAN) connected to it access to an outside network (Internet) address is usually the address of the router that gives us our internet operator, to provide Internet .
- Serve DNS r: Servers which among other things, its main function is to translate addresses easy to remember ( dhorgt.blogspot.com ) IP addresses (74.125.45.132) for global positioning, if no servers are configured correct DN will not be possible to navigate with easy to remember addresses. List of DNS Servers World , Europe. Google's Public DNS
- window shown in Figure 5.
- Then press the OK button the window shown in Figure
Figure 1: Figure Start>> Control Panel
2: Network Connections in Control Panel
Figure 3: Network Connections
Contact the bullet 
- Figure 4: Network Interface Properties Give
Figure 5: Properties TCP / IP Click OK
Ready IP configuration of the machine was already configured! If you have questions about any step of this procedure let them in the comments.
0 comments:
Post a Comment